Відео

Great video thx for the info .

They got him on Amazon for 200 bucks and a $100 shipping. I'm gonna order one for myself. I'm 290 pounds and a kid at heart.❤ If the head unbolt you could shave the head about .030in I'm probably gonna extra half horsepower. I did this with bicycle engine kits and they would scream.

That kiddo is going to be a motocross champion By the time he is 12 years old.❤❤❤❤

❤ Very happy. To subscribe and very happy to see a family enjoying each other and doing fun things love you guys.❤ Yeah, Yahoo.

Really liked this video. Perfectly made with excellent cinematography, professional narration, excellent editing, extremely nice video equipment and mounting placement. I absolutely love the helmet!!! Very well done. I instantly liked and subscribed, set my notification bell and will be adding channel to favorites list. I have new standards to achieve now on my channel. Blown away!!

I think the cam bearing is Koyo...not Timken...2023 and up OEM seems to come with the updated bearing... R&Ring that thing is not necessary since it is the same frickin thing.

Dude where did you get that apparatus for the bags?

Knew you had military time by the demo setup. A++ Video. Thank you.

But my harley davidson limited low produced 2016. Can i install or i have to chance another screen?

Installed this headlight a few months ago and, for the life of me, could not figure out why people were flashing brights at me. Didn’t adjust when I installed and it was too high. 4:27 If you use the Mac Tools stubby hex set, SBR39SB, you can adjust w/o having to disassemble the whole fairing. Takes some finesse to get it slotted, but once you have the “feel” it goes smooth

It would be awesome if it could be keyed to match my ignition.

When you get issues with the soundstream radio, go to the Rockford pmx radio for your bike.... Fixes all the issues.

I like that the reservoir is next to the shock body. Great video clearly explained and made me feel like I could do it

Awesome!

Love my RS-1s. On my 3rd pair over 3 bikes. Bar none the best aftermarket shock ive had on any of my bikes. Probably won't swap or change out for the RS-2 until it's time for another bike, but I'll forever run RWD on my bikes.

I’m gonna have to check them out.

Because I value your opinion now I have to look at a third shock to replace the stock crap Harley puts out. Also looking at JRI and Nowaskey. So far RWD are 800 less expensive which could go towards the front end. Decisions !

Great video. Keep it up!

Looks like I’m gonna have to order some new shocks now. ❤

Very helpful video. I have no idea where that cotter pin went 😅 I will find it. I’m doing a Santoro Fabworx just the tip brake arm for the moment. This is a great vid. Love TS’s stuff and do run it as well.

Just about any aftermarket suspension is better than what comes stock on most HDs. I went with a different brand a few years ago. I really noticed the most difference with the front. No more front-end diving when you hit the front brakes and the front tire feels planted in the corners. Great video. You are really thorough in explaining and demonstrating the process of the installation.

🤘🤙👍👋🇺🇸🇺🇸⚓️🇺🇸🇺🇸

Like your work🤩🤩🤩

Excellent content as usual

I bought a Vulcan 1500 with these lower pods on it. It currently has four 5 1/4" speakers in a bat wing upper faring. The lower pods came empty. I was thinking about Changing the four speakers In the upper faring and going with 2 6x9s instead. Do you think the speakers you added would compliment two 6x9s and add some base to the system? I don't want to put speakers in my saddle bags for now. Thank!

Heads up the paper instructions with this fender show the washer for each screw going against the locking nut inside the fender, not against the outside of the fork. Not saying to follow the paper instructions but I did notice this during my own install.

I love mine, Find it funny they call it a Baffle. If you pull the Zombie Baffle out you will notice that it is just a straight pipe.

Basically if I buy my exhaust two O2 eliminators for rear of OEM exhaust, keep current air filter as it stage one applicable I can put the Dyno gadget on the street bob 114 2022 UK model I can basically do the stage one on this my self at home, then next year change filter and do cam and pump stage 2 and buy the O2 gadget as I cat afford it all now? This year just desperate to do exhaust there's literally no info on the UK models for this....if I buy the O2 sensor part does that stay on the bike permanently then and not just for tuning if so I buy that in 3 months ( on a tight budget)

Awesome video. However, the system is terrible

Respekt 🙌

Good shit bruh very helpful

Ok thank you

Does the well nut fit flush against the frame?

Best channel 👌

Another great vid. Question, does the pulley and isolator not play role in the balancing?

Let me ask you....the space between the fender and chin spoiler isnt too close juat in case you hit a bump and the front forks have to compress down..the spoiler and fender wont touch?

Bro what a great video, I’ve been searching for something like this for awhile, I’m in Florida like you, my layout is similar to your garage, I think this is the only video available of a mini split system install on a concrete wall! You just gave me the confidence to tackle this job myself. Thank you so much!!! 👍🏽👍🏽

Great explanation and well videoed. Doing the wiring now. 18k unit scheduled to arrive Saturday. Doing the install solo too. Would be helpful if I also benched 500 plus pounds

Great video! I think a great idea would be to paint black the visible portion of the zombie baffle as it sits in the slip on. High temp paint.

These systems sound great but I’d love to hear them with some hip hop, so I can hear the bass response. I want to install a stage 4 with my SoundStream hdhu 14+.

Just a quick question. On the oil level isn’t that over full?

Great vid! Does the t fitting come with the kit

Thanks again for all the step by step instructions. Mine didn’t go on as easy, but it worked out. Ride safe

Hello everybody, I am looking to get a dirt bike or a pit bike and I’m 12 and I was wondering if I make the bike street legal can I legally ride it? Cs I see people with out licenses ride bike over 50cc and I don’t know how

A bit overkill with the fairing but good job.

What lights are you using for your garage?

Excellent video. Especially the details and no skipping or fast forwarding. True step by step!!! Well done.

​​@RAIDERWORLD I would only recommend Hertz to people in Canada 🇨🇦 Electromedia parent company of Hertz started smoking the good stuff when they raised the prices 1 yr after SPL line was introduced.. They aren't worth $445/pr for 6.5 or $550/pr for 6x9 in the US. They need to go back to intro prices. They cant compete with other lines at their price point like Euphoria Xpert, Beyma, Diamond MSNeo, Ground Zero, Cicada, or PRV. GZ 6.5 Neo and GZCF 69 SPL are same price and handle 3x power. PRV Carbon is cheaper and Handles twice the Power.. Lot better options.. Not an opinion, just facts based on stats, graphs and RTA comparisons.

Do you do this for a living? If you do, where are you located? I would like if you can do the same to my 2014 Ultra

Great product but over priced